Page 151 - tymp

TROUBLESHOOTING

4. HYdRaULIc SYSTEM

TROUBLE PROBaBLE caUSE SOLUTION

Oil leaks from the pipe • Loose clamp • Tighten
or hose • Cracked pipe • Have it replaced by workshop
• Lowering speed control lever fixed to stop position • Set it to the lowering position

The hydraulic pressure • Defective valve • Have it repaired by workshop
won't be decreased • • Damaged cylinder • • Have it repaired by workshop
Hydraulic system • • Insufficient engine RPM • • Set the speed to 1000 to 1500 RPM
Damaged and seizured lift shaft rotating part
Have it repaired by workshop

Insufficient transmission fluid
Add to the specified level
Air sucked into suction pipe
•
•
Tighten the connection. If any pipe or hose is
cracked or O-ring is damaged, replace it
The hydraulic pressure 8 76 4 38
won't be increased • Clogged oil filter • Clean
• Defective hydraulic pump • Have it repaired by workshop
• Defective valve • Have it repaired by workshop
• Damaged cylinder • Have it repaired by workshop

8 -