Page 160 - tymp

Safety Standard for farm work

5. InStructIon after uSe 6. cautIonS for InSpectIon and maIntenance

 When the work is completed, stop the engine on a  Do not refuel either when the engine is still hot or
leveled ground, check the machine to clean. (remove while driving.
any foreign materials)
- Remove straws, dirt, etc and clean around the en-  Measures against a fire: Every working place with a
gine, silencer, and fuel tank. risk of fire should be provided with a fire extinguisher.
Prevent a fire by taking measures such as making a
smoking area.
 Lay a cover on the transplanter (equipment) after the
muffler and engine cool down.  Always wipe off the leaked fuel.

 Get a regular inspection after the season is over.  Be seated in the cab when starting the engine.
- When discarding a part (battery, oil, etc) or scrap a
machine, consult to a dealer and proceed accordingly.  After refueling, tighten the fuel cap and check if there
is any fuel leakage from tank or pipe.
 For long-term storage, remove the battery from the
machine and store it or disconnect the negative battery  When opening a cap to supply water to radiator, be
cable. careful because steam or boiling water may spray due
to overheating.

 When getting off the cab, turn off the engine, lock the
parking brake and remove the ignition key.

 If it is inevitable to park on a slope, choke the wheels.

 Park on a leveled and safe ground safely.

 Check if the wiring code is in contact with other parts,
peeled, loose or having spacing.
9 - 6