Page 161 - tymp

Safety Standard for farm work

7. tractor

 Manage PTO  Do neither modify nor remove the safety device.
- Stop PTO before stopping the engine.
- Do not remove the PTO protective cover or protec-  When checking and replacing the blade to plow the
tive panel for operating machine. ground.
- Do not use PTO adaptor in order to extend the POT - Stop the engine.
coupler or universal joint to outside of PTO protec- - Prevent the rotary from falling by turning the fall ad-
tive cover. justing handle to stop hydraulic pressure.
- Apply the parking brake.
 To repair, secure the wheel width, or changing the - Do not stand between tractor and rotary.
wheel under either tractor or trailer, with the tractor or
trailer raised, choke the wheels that are on the ground.
 When working with rotary
 Do not use hydraulic jack for operating machine or - Do not put your hands near the rotating part such as
tractor. Instead, use block or stand. blade axle and universal joint.
- Do not ride on the rotary.

 Safety frame - When driving backward or turning quickly with the rota-
ry raised up, make sure to check behind the machine.
- Do neither weld nor drill a hole on the attached safe- - Adjust the rear cover. 76 4 39
ty frame. Also do not modify it.
- Replace the damaged safety frame with a new one.
- If the safety frame was removed for specialized
work, restore it immediately.

 Be careful to touch dangerous area such as power
transmission gear, rotating unit, etc. Put on a protec-
tive cover.

9 - 7