Page 79 - tymp

DESCRIPTION OF TRACTOR CONTROLS

(2) How to disengage coupler
① Lower the implement on the 2
ground to release pressure in
the hydraulic hose.
A ② Stop the engine and operate the
B remote hydraulic lever to remove
any residual pressure in the
hose.
T34O330B ③ Disconnect the male coupler on
the implement side while mov-
► AUx. HYDRAULIC VALVE ing its external ring on the tractor
(OPTION) side backward slightly.
(1) How to engage coupler ④ Wipe oil and dust from the cou-
① Clean the couplers on the tractor pler and plug the dust cover.
and implement thoroughly.
② Remove the dust cover from the WARNINg
tractor side. Then, fit the male • To prevent a burn and skin
coupler on the implement side damage, make sure to stop the
while moving its external ring engine before connecting or
backward slightly. disconnecting the coupler.
③ Pull the male coupler on the im- • Do not use your hands to check
plement side backward slightly for oil leakage.
to check its firm engagement.

2 - 1