Page 76 - tymp

DESCRIPTION OF TRACTOR CONTROLS

► O P E R AT I N g T I P S F O R (4) Turning the steering wheel to
POWER STEERINg WHEEL its end unnecessarily (with the Position lever
(1) Operate the power steering tractor stopped) can wear tires
wheel only while the engine is rapidly.
running. You may feel the steer- (5) In winter, warm up the engine
ing wheel heavier with a low en- sufficiently before use.
gine speed. (6) When repairing components,
(2) When an implement, such as a such as a pipe, make sure that
loader, is attached to the front, no foreign material enters the T57O209A
the steering wheel may be felt system.
heavy with the tractor stopped. (7) The steering wheel can be op- ► IMPLEMENT LIFT CONTROL
If so, operate the steering wheel erated with a small amount of SYSTEM
while driving the tractor at a low force. Therefore, operate it with (1) Position lever
speed. care and keep your hands on it This lever is used to lift and lower
(3) When the steering wheel is at all times. an implement to a certain working
completely turned to one end, height freely and maintain it.
the safety valve is activated to WARNINg
output the audible signal (relief • Releasing the steering wheel <Operation>
sound). When this sounds, avoid during driving can result in a 「 Lifting implement」
using the steering wheel (O.K. collision and rollover. Never re-
only for a short time). Also, never lease the steering wheel during Pull the lever back to lift the im-
turn the steering wheel com- driving. plement.
pletely continuously. 「Lowering implement」
Push the lever forward to lower
the implement.

2 - 2