Page 116 - tymp

Maintenance and service

④ Firstly, start the engine of the vehi- ► checking electric Wiring
cle with the normal battery. Then, (1) Loose wiring terminals can cause
start the engine of the tractor with contact failure and damaged wir-
the discharged battery. ings can lead to performance
⑤ After the engine is started, discon- deterioration of electric devices,
nect the negative cable first. Then, short circuit and fire. Replace or
disconnect the positive cable. repair aged and damaged wirings.
⑥ Charge the discharged battery for () If wiring sheath is peeled off, wrap
T54O53A approx. 30 minutes after the en- wiring with insulating plastic tape.
gine is started. (3) If fasteners or bands to fix wir-
► juMp start ings are damaged, fix wirings with
① Turn off all electric devices. Warning clamps.
② Connect the positive terminal of • Make sure to connect the posi- (4) Have wirings checked by your
the normal battery to the positive tive terminal first and connect workshop once a year regularly to
terminal of the discharged battery the negative terminal to the en- avoid fire.
with the jump cable. gine body of the tractor with the
③ Connect the negative terminal discharged battery.
of the normal battery to the en-
gine body of the tractor for the
discharged battery with the jump
cable.

5 - 18