Page 118 - tymp
P. 118
Maintenance and service
► replacing laMp bulb
If a lamp does not come on by operating the corresponding switch:
① Check the corresponding fuse.
② If the fuse is intact, remove the bulb socket from the lamp.
③ Remove the bulb from the socket and check for blown filament.
④ If the filament is blown, replace the bulb with a new bulb with the same ca-
Normal Open circuit pacity.
T940 bulb specifications
Headlamp 1V H4 55W
<inspection> Turn signal lamp (Front) 1V 1W
Check the fuse through the trans- Turn signal lamp (Rear) 1V 1W
parent window to see if it is blown. Position lamp (Front) 1V 5W
Stop lamp/position lamp 12V 21W / 5W
Instrument cluster lamp 1V 3.4W
Work lamp(Rear) 1V 5W
5 - 0
