Page 86 - tymp
P. 86
OPERATION
1. ENgINE sTARTINg
► hOw TO sTART ENgINE wARNINg NOTE
① Make sure that there is no ob-
stacle around the tractor. • Never start the engine by con- • The engine will not start unless
② Seat on the driver's seat and necting the start motor terminal the brake pedal is depressed.
or safety switch directly. The
confirm that the parking brake is tractor may move suddenly and • Do not turn the main switch to
applied. cause an accident. the "START" position while the
③ Check that each shift lever and engine is running.
PTO switch are in the neutral • Avoid running the start motor
position. over 10 seconds. It consumes a
④ Pull the throttle lever halfway. lot of current.
⑤ Insert the key into the main • If the engine cannot be started
within 10 seconds, wait for 30
switch and turn the switch to seconds and try it again.
the "ON" position. Check that
the engine oil lamp and charge • The engine cannot be started
warning lamp come on. unless the driver is seated on
⑥ Turn the main switch to the the driver's seat. Start the en-
gine on the driver's seat.
"START" position. When the
engine is started, release the
switch.
⑦ Confirm that all monitoring lamps
go off after the engine is started.
3 -
