Page 87 - tymp

OPERATION

2. ENgINE sTOPPINg 3. ENgINE IdlINg

OFF ► gENERAl ENgINE IdlINg ► ENgINE IdlINg IN COld CONdITION
ON
After starting the engine, idle the en- Hydraulic oil in this vehicle is also
START gine for 5 to 10 minutes so that oil is used as transmission fluid.
delivered to each part of the engine. If the temperature drops in winter so 33
NOTE oil gets cold, its viscosity rises and
• If the engine is loaded right af- the hydraulic pump cannot suck oil
in, causing malfunction.
ter it is started, it may cause en-
gine stalling and failure. Make Make sure to idle the engine in
T39O30A sure to idle the engine first. winter according to the following in-
► sTOPPINg • If neglecting to idle the engine, structions.
① Idle the engine. it can cause: Temperature Idling time
② Turn the main switch to the - Seizure of the hydraulic pump 0°C or higher At least 10 min
"OFF" position. - Filure in the hydraulic system. 0 ~ -10°C 10 ~ 20 min.
③ Remove the key from the switch. -10 ~ -0°C 20 ~ 30 min.
NOTE wARNINg -0°C or less At least 30 min.
• Do not stop the engine at a high • Make sure to apply the parking
speed. brake while idling the engine.
• If the engine has been running • Never idle the engine in a poor-
for an extended period of time, ly ventilated area. It can cause
stop the engine only after idling carbon monoxide poisoning by
it for 5 to 10 minutes. emissions.

3 - 3