Page 94 - tymp
P. 94
Work Procedure
1. Precautions for handling imPlement 2. general imPlement
(1) When driving the tractor to at- Warning ► rotavator
tach or detach an implement, <safety precautions for rotavator>
make sure that there is no one • Read instructions on warning de- • Never remove the safety cover
in between or around the tractor cals on each implement thorough- of the rotavator.
and implement. ly before work. • Do not remove the PTO shaft
() Install and remove the imple- • To avoid an injury due to mishan- cover and safety cover on the
ment only on safe and level dling of an implement, read the universal joint.
ground. user's manual of the implement • When adjusting each part, disen-
(3) When installing a heavy imple- thoroughly and work safely and gage the PTO and stop the en-
precisely with caution.
ment, install weight on the front gine in advance.
to keep balance. • Installation of an improper imple- • When driving on a road, keep
(4) When adjusting an implement, ment can lead to an injury. Install the PTO disengaged. Also, keep
only implements specified by the
apply the parking brake, stop the Manufacturer. the rotavator lowered on a road
engine and set the PTO switch as long as it does not hit the
in the OFF position in advance. ground.
(5) To tow anything, use the towing • For the universal joint, its inner
hitch only. shaft and outer shaft should be
overlapped at least 15 cm.
• Check that the universal joint is
firmly fixed to the tractor and ro-
tavator shaft.
4 -
