Page 109 - tymp
P. 109
Maintenance and service
Bolt
pliers
Replacing engine
T39O51A oil filter cartridge 4 35
T39O511A T39O513A
► transMissiOn strainer ► replacing engine Oil
cleaning filter cartridge
① When changing transmission fluid, ① Remove the engine oil filter car-
clean with diesel fuel. tridge by turning it counterclock-
② Unscrew the filter body support bolt wise with a wrench.
from the right lower section of the ② Apply a thin film of oil to the
rear transmission case and gently O-ring of a new cartridge and
pull the filter with pliers to remove install the new cartridge by
it. tightening it with a hand. When
its packing touches the sealing
surface, turn it approx. 2/3 turns
further with a wrench.
③ Put the engine oil to the speci-
fied level. in new oil filter car-
tridge.
5 - 11
