Page 104 - tymp

Maintenance and service

4. checking and changing Oil

► cleaning radiatOr and Engine oil
cOndenser grilles gauge
When working in a grassy field or
working at night, the radiator or
condenser grille may be clogged
by grass, straws or bugs, reducing
cooling performance.
In this case, clean the grille. If dust Engine oil Drain plug
is stuck between the fan and tube, cartridge T39O50A T39O507A
flush the area with clean water.
nOte Engine oil (2) changing
• Do not clean the radiator fin with gauge  Unscrew the drain plug on the
water jet. It can deform the fin. lower section of the engine to
drain contaminated engine oil.
Since hot oil flows out of the en-
Upper limit
Lower limit gine first, be careful not to get
burnt.
T54O508A
 After draining oil, tighten the en-
► checking and changing gine oil drain plug.
engine Oil  Add the specified amount of the
(1) inspection specified engine oil through the
① Pull out the dipstick, wipe its tip filler hole.
and insert it again. Then, pull it out
and check that the oil level is be-
tween the upper and lower limits.

5 - ② If insufficient, add oil.