Page 105 - tymp
P. 105
Maintenance and service
nOte (3) Oil specification
Transmission
• Do not add engine oil over the Diesel engine oil: fluid filler hole
upper limit level. (API CJ-4 SAE 15W40)
• Check the engine oil before cautiOn
starting the engine or at least
in 5 minutes after the engine is • If engine oil gets on your skin, it
stopped. can irritate the skin and cause
• When trying to use new oil from a skin condition. Make sure to 4 35
a different manufacturer or oil clean your skin with soap and T57O504A
with different viscosity, drain water or hand cleaner thorough- ► checking and changing
used oil completely before add- ly. transMissiOn fluid
ing new oil. • Make sure to cool down the (1) inspection
engine sufficiently before drain- Perform inspection with the engine
ing oil. Oil is very hot and can stopped.
cause a burn if changing oil
right after the engine is stopped. ① Check the transmission fluid lev-
el through the sight glass to see
if the level is between the upper
and lower limits.
② If insufficient, add oil.
5 - 7
