Page 106 - tymp
P. 106
Maintenance and service
nOte
Upper • Do not add fluid over the upper
limit limit level.
• Check the fluid before starting
Lower
limit Drain plug the engine or at least in 5 min-
utes after the engine is stopped.
T39O508A
• When trying to use new fluid
from a different manufacturer
T39O509A
or fluid with different viscosity,
(2) changing drain used fluid completely be-
① Unscrew the drain plug on the fore adding new fluid.
lower section of the transmission
to drain contaminated transmis- (3) Oil specification
sion fluid. Since hot fluid flows API GL-4 Grade
out of the engine first, be careful Tractor transmission and hydraulic oil
not to get burnt.
② After draining fluid, tighten the Below -4ºF(-0ºC) ISO VG3
transmission fluid drain plug. Above -4ºF(-0ºC) between ISO
③ Add the specified amount of VG4 and 8
the specified transmission fluid
through the filler hole.
5 - 8
